All Collections
Products and the Till
Till
Setting up a till drawer and receipt printer
Setting up a till drawer and receipt printer

How to set up your Till hardware

Updated over a week ago

Within this article it will show you how to setup the till. The top part of the article will be written instructions on how to setup the till, At the bottom of the article you will find a video on how to setup the till.

Step 1

The first thing you will need to do is download and install the printer drivers.

Please ensure the hardware at the time is not connected to the PC.

You may need to restart your pc.

Step 2

Please plug in all the hardware.

Step 3

Now you will need to download the welcome screen (settings, club info, apps, download welcome screen & pos printer).

Please ensure you have all the hardware plugged in when installing the welcome screen.

Step 4

Open the welcome screen and click f12 (this will open the command box).

Now select the POS printer which you have and test if needed.

Within the till command you will enter in the drawer codes (please see below).

Use the link below to check for the Till's that we support , Once you find your printer copy the drawer code and paste into the till command.
​
​http://keyhut.com/popopen4.htm

Step 5

Save , close and reopen the welcome screen and it should work correctly.



​

Did this answer your question?